Resetwmi Crack+ [Latest 2022]

ResetWMI is a command-line utility developed to repair corrupt WMI repositories. It can be used to recover the original WMI database and thus ensure the proper functioning of the WMI service. You can use this tool in scenarios where you are receiving WMI service errors due to corrupted or damaged WMI databases.
Maxim Sergienko

The WMI Repository, located at C:WindowsSystem32wbemRepository, is a Windows database that holds definitions and meta information of WMI classes. There are also cases when it includes data about static classes, too. When this repository becomes damaged, then the WMI service will no longer work properly either because it depends on this repository.

Also known as “Windows Management Instrumentation”, the WMI service can be found as “winmgmt”. It runs at Windows startup automatically using the LocalSystem account. If this service cannot run due to the fact that the WMI repository is corrupt, this may lead to overall system stability issues.

Fix corrupt WMI repositories using this tool

In this case, it’s better to fix the WMI service by repairing the damaged WMI repository. And this is where ResetWMI comes into play. Built as a standalone application available through the command-line tool, it’s designed to reconstruct the original WMI repository, in order to make sure that everything is working properly again.

It’s not necessary to go through a setup stage because there is no installation involved. Therefore, you can keep it stored in your collection of portable software and fire it up whenever you are experiencing issues with the WMI repository.

Silently runs in the console, without showing messages

The downloaded package includes two executable files for 32-bit (x86) and 64-bit (x64) operating systems, so make sure to use the one that corresponds to Windows architecture type. It’s also a good idea to run command prompt with administrative privileges, just to make sure you won’t run into permission-related errors.

ResetWMI is completely silent. After calling its process without using any other arguments, it proceeds with fixing the WMI repository right away, without showing any messages. In fact, it doesn’t even tell you whether or not the task was successful. However, you can try manually starting the WMI service to test this.

Although it hasn’t received updates for a pretty long time, our tests have indicated that ResetWMI still works well

Resetwmi [Latest] 2022


Proceeds with fixing the WMI repository automatically
Provides an option to manually trigger the reset process
If automatic repair works correctly, it shows the result by saying “done”.

No user interaction:

Can be used on all Windows versions
Silent process so as not to bother the user

What’s new in version

Added support for 32-bit systems.
Updated the documentation to include a tutorial.

What’s new in version

Made the process simpler by adding an option for quick fixing.
Optimized the program by eliminating unused variables.
Made it compatible with Windows 10.
Optimized the code to improve its performance and reduce the memory footprint.

What’s new in version

Improved the program’s stability.
Made some fixes to the documentation.

What’s new in version

Fixed a bug that was causing an error when attempting to repair a corrupted registry key.

What’s new in version

Fixed the bug that caused errors when repairing corrupted registry keys on Windows 10.

What’s new in version

Made the repair more reliable by performing checks before repairing.
Made the process more efficient by eliminating the need to load two assemblies.
Added a repair option for damaged registry keys.

What’s new in version

Fixed a bug that caused a segmentation fault if the program was used on Windows 10.

What’s new in version

Fixed a bug that caused an error when installing the program.

What’s new in version

Fixed a bug that caused the repair of the registry key to fail.

What’s new in version

Fixed the bug that caused the tool to crash when trying to use the command-line version on Windows 10.

What’s new in version

Fixed a bug that prevented the update of the program from being installed successfully.

What’s new in version

Made the repair process more reliable.
Made the application


ResetWMI is a command-line tool for repairing WMI repositories. It’s fully compatible with Windows 8.x and Windows 7.
Download the latest version of the standalone executable file for the operating system you are using. For a quick install, it’s best to use a portable program manager.
ResetWMI is a completely silent application. Just install it without any further parameters.
Start ResetWMI. In the following window, run it with administrative privileges.
ResetWMI is a command-line tool for repairing WMI repositories. It’s fully compatible with Windows 8.x and Windows 7.
Bug Fixes:
An issue with WMI was fixed in 2014

Edit: Note that the WMI Repository is not the same as WMI Catalog. The WMI Repository is where WMI classes are stored. The WMI Catalog is a “meta-information” WMI database that holds information about WMI classes, their properties and methods.
When the WMI Repository becomes corrupt, you may get an error message stating that it was unable to open WMI database. While the former is a little more serious, the latter may be just a matter of applying the proper repair. You should perform the following steps in order to deal with corrupt WMI repositories:

Use ResetWMI to repair the corrupted WMI Repository.


After launching the executable file, the software will attempt to fix the damaged repository. If it succeeds, the command prompt will display the message “Repository has been successfully repaired.”

Do not close the command prompt. If you want to monitor the progress, use the “WATCH” button at the bottom left.

You should also look up a program to scan your computer for WMI related problems. We use our own tool called SystemWMIRepair.

I have used winjammer and it is good but i want the same scanning functionality as this article says. I tried doing that once but it did not give the results i wanted.

If the Repository is damaged, the WMI service may crash, causing the following error: “Win32 error 0x80005005 in StartServiceCtrlDispatcher

When I click on the batch file, I get a “loading” window that never ends. Can anyone help me figure out how to make this work?

What’s New In?

* This tool can be used to repair corrupt repositories.
* It allows users to reset a WMI repository that is damaged, so it can be used as a standalone application.
* It doesn't require any installation process.
* It's silent, because it only needs to call its own process to fix the damaged WMI repository.
* It's compatible with Windows 7, 8 and 10.

ResetWMI is a cross-platform tool designed to repair corrupt databases. If you are using a version of Windows older than Windows 10, then you will definitely be interested in this Windows tool that can fix damaged databases and restore them to their original state.
Why you need to repair corrupted WMI databases
In most cases, the original WMI database is corrupted. This causes registry problems and leads to the malfunctioning of various system components. Windows users can repair WMI databases manually, but this can be a very tedious task. And unfortunately, there are more than a few scenarios where WMI databases get damaged.
When a user installs or uninstalls software using Windows-provided mechanisms, this can also cause WMI repositories to become corrupted. Sometimes, deleting files from the Windows directory can lead to data loss, since the file locations in the registry are sometimes identical.
Fix corrupt WMI repositories using this tool
To fix corrupt databases, ResetWMI is a cross-platform utility that allows you to recover data from damaged WMI repositories in Windows 7, 8 and 10. It doesn't require any setup, so there's no installation involved.
As a cross-platform utility, it can be called from almost any Windows command prompt, irrespective of whether you're using 32-bit or 64-bit operating systems. After running it, the tool can fix any type of database, including those damaged by WMI.
The program, which is packed in an archive that is conveniently accessible using the command prompt, works by resynchronizing WMI repositories, so they can be used properly again. As a result, all of your settings and settings are restored. It's not necessary to go through a lengthy and complicated process; after all, ResetWMI is a powerful tool that fixes corrupt databases and restores them to their original state.
Furthermore, the Windows tool will display the status of the repair process in a handy dialog. This makes it very easy to track the progress of the fix, and it keeps you updated on what's happening.
After the repair process is complete, you're advised to exit the tool. This is the only time the program displays any type of messages. If you're running from the command prompt, then you're also advised to stop the WMI service first.
Silently runs

System Requirements For Resetwmi:

OS: Windows 7 64bit / Windows 8 64bit / Windows 10 64bit
Processor: Intel Core i3 or AMD equivalent
Memory: 2 GB RAM
OS: Windows 10 64bit
Processor: Intel Core i5 or AMD equivalent
Memory: 4 GB RAM
Graphics: Nvidia GeForce 650 or AMD equivalent
DirectX: Version 11
Network: Broadband internet connection
Storage: 15 GB available space
Minimum: OS: Windows 7 64bit / Windows 8

Dejar respuesta

Please enter your comment!
Please enter your name here